V100-1.8 MW

The V100-1.8 MW turbine is designed for high energy production from low wind sites, with a greater rotor diameter that enables maximum output at low wind speeds. Being classified as IEC S means that the V100-1.8 MW is suited for IEC IIIA average and IEC IIA extreme wind conditions. Designed, tested and manufactured for quality, the V100-1.8 MW makes even the lowest wind speed sites commercially viable.

Data

Operational data

Rated power: 1,800 kW (50 Hz)
                    1,815 kW (60 Hz)

Cut-in wind speed: 3 m/s
Rated wind speed: 12 m/s
Cut-out wind speed: 20 m/s
Wind class: IEC S (IEC IIIA average wind and IEC IIA extreme wind)
Operating temperature: range standard range -20°C to 40°C, low temperature option -30°C to 40°C

Rotor

Rotor diameter: 100 m
Swept area: 7,850 m2
Nominal revolutions: 14.5 rpm
Operational interval: 9.3 - 16.6 rpm
Air brake: full blade feathering with three-pitch cylinders

Electrical

Frequency: 50 Hz/60 Hz
Generator type: 4-pole (50 Hz)/6-pole (60 Hz) doubly fed generator, slip rings

Power regulation

Pitch regulated with variable speed